RyMar®
Aesthetically pleasing weatherproofing systems for flat roofs.
A weatherproofing solution to seal the vent pipe to the roof system – with a factory-bonded flange to match the specific membrane material being used.
RyMar RM-VENT
Twin-skin stainless steel cover to protect and conceal unsightly pipes on refurbishment projects – the internal pipe sits within the vent pipe and is fitted with an ‘O’ ring seal to provide a watertight seal.
Simply installed over the top of an existing vent pipe, and the membrane flange is bonded to the waterproofing membrane.
With a height of between 335mm and 600mm above the membrane, RyMar RM-VENTs provide ventilation for most applications. Featuring a stainless steel weather cowl to protect against rainwater and airborne debris.
RyMar IMVENT
Single skin stainless steel insertion pipe cover – similar to the RM-VENT, but instead of fitting over a vent pipe, requires the installer to cut the vent pipe down to the finished roof level. The spigot of the RM-IMVENT is inserted into the vent pipe, and the membrane flange is bonded to the waterproofing membrane.
Featuring a 300mm high sleeve to ensure good ventilation and an ‘O’ ring which creates an effective seal against vapours. These can be supplied for use with bituminous and polymeric roofing membranes.