DrillFast® 35mm painted low profile timber fastener, 15mm washer

A4/316 grade stainless steel lacquered low profile fastener for fixing to timber or max 1.2mm steel, supplied pre-assembled with a stainless steel / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.

Certified by

Certified by

DrillFast® 35mm painted low profile timber fastener, 15mm washer

Product Code

Colour*

Your price

Per 100

Qty

This item may be subject to a £30 powder coating surcharge. This will be confirmed at checkout

Create New Favourites List

Related Products

SafeSeal™ 5 x 6 butyl strip sealant - Box of 30 rolls

Add to favourites

Create New Favourites List

SafeSeal™ 5 x 6 butyl strip sealant - Box of 30 rolls

Product code

Your price

Per 1

Painted sealed head rivet - stainless mandrel

Add to favourites

Create New Favourites List

Painted sealed head rivet - stainless mandrel

Colour

Lengths

Product code

Your price

Per 100

Add to favourites

Create New Favourites List

DrillFast® painted low profile light steel panel fasteners, 15mm washer

Colour

Lengths

Product code

Your price

Per 100

SafeSeal™ 5 x 6 butyl strip sealant - Box of 30 rolls

Your price £75.00 (ex.VAT)

Painted sealed head rivet - stainless mandrel

Your price £16.02 (ex.VAT)

DrillFast® painted low profile light steel panel fasteners, 15mm washer

Your price £95.01 (ex.VAT)

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Austenitic Stainless Steel A4 Grade (316)	40	40	40	40	30	25	0

Installation tool	Variable speed electric screw gun
Installation drive	Fixfast RedDrive
Installation speed	1500 RPM
Correct installation	Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating.
Handling	Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners.

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Austenitic Stainless Steel A4 Grade (316)	40	40	40	40	30	25	0

Installation tool	Variable speed electric screw gun
Installation drive	Fixfast RedDrive
Installation speed	1500 RPM
Correct installation	Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating.
Handling	Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners.