MatchFast® stainless light steel panel fastener, 29mm Washer
A2/304 stainless steel composite panel moulded fastener for fixing to light section steel. Supplied pre-assembled with a lacquered 29mm diameter sealing washer.
Standard stock colours are available for next-day delivery, special colours have a lead time which will be confirmed on your order acknowledgement - please call us if you wish to confirm a lead time before ordering.
Certified by
Estimated lead times
1-4 Days
Estimated lead times
4-6 Days
Estimated lead times
1-4 Days
Estimated lead times
1-4 Days
Estimated lead times
4-6 Days
Estimated lead times
4-6 Days
Estimated lead times
4-6 Days
Estimated lead times
4-6 Days
Certified by
Estimated lead times
1-4 Days
Estimated lead times
4-6 Days
Estimated lead times
1-4 Days
Estimated lead times
1-4 Days
Estimated lead times
4-6 Days
Estimated lead times
4-6 Days
Estimated lead times
4-6 Days
Estimated lead times
4-6 Days
Product Code
MF3-SS-HT-L29-5.5
Lead Time
1-4 Days
Lead Time
4-6 Days
Lead Time
1-4 Days
Lead Time
1-4 Days
Lead Time
4-6 Days
Lead Time
4-6 Days
Lead Time
4-6 Days
Lead Time
4-6 Days
Your price
Qty
£0.73
(ex.VAT)
As low as:
(ex.VAT)
Create New Favourites List
Key Features
Specification
Capacity
Performance
Installation
Downloads
Description
Stainless steel nylon headed high thread fasteners for fixing composite panel systems to light steel.
Features & Benefits
- Precisely matched colour head
- Genuine A2 stainless steel for optimum corrosion resistance
- We can supply or match almost any RAL, BS or NCS colour
- Supplied pre-assembled with a lacquered Aluminium / EPDM rubber 29mm diameter sealing washer, normally used for fastening rooflights
Application
- For mechanically fixing composite panel systems to light metal purlins and rails, and timber
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Head Style
Bi-Hex 11mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
150 mm
Effective Thread Length (Min)
78 mm
Effective Thread Length (Max)
124 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
85 mm
Effective Thread Length (Min)
33 mm
Effective Thread Length (Max)
59 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
130 mm
Effective Thread Length (Min)
58 mm
Effective Thread Length (Max)
104 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
180 mm
Effective Thread Length (Min)
93 mm
Effective Thread Length (Max)
154 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
110 mm
Effective Thread Length (Min)
48 mm
Effective Thread Length (Max)
84 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
240 mm
Effective Thread Length (Min)
143 mm
Effective Thread Length (Max)
214 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
225 mm
Effective Thread Length (Min)
128 mm
Effective Thread Length (Max)
199 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
275 mm
Effective Thread Length (Min)
178 mm
Effective Thread Length (Max)
249 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Build-up
Effective thread length
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | Fixfast Matchfast MF1165 |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
Please see the below files available to download for this product
Key Features
Description
Stainless steel nylon headed high thread fasteners for fixing composite panel systems to light steel.
Features & Benefits
- Precisely matched colour head
- Genuine A2 stainless steel for optimum corrosion resistance
- We can supply or match almost any RAL, BS or NCS colour
- Supplied pre-assembled with a lacquered Aluminium / EPDM rubber 29mm diameter sealing washer, normally used for fastening rooflights
Application
- For mechanically fixing composite panel systems to light metal purlins and rails, and timber
Specification
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Head Style
Bi-Hex 11mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
150 mm
Effective Thread Length (Min)
78 mm
Effective Thread Length (Max)
124 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
85 mm
Effective Thread Length (Min)
33 mm
Effective Thread Length (Max)
59 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
130 mm
Effective Thread Length (Min)
58 mm
Effective Thread Length (Max)
104 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
180 mm
Effective Thread Length (Min)
93 mm
Effective Thread Length (Max)
154 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
110 mm
Effective Thread Length (Min)
48 mm
Effective Thread Length (Max)
84 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
240 mm
Effective Thread Length (Min)
143 mm
Effective Thread Length (Max)
214 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
225 mm
Effective Thread Length (Min)
128 mm
Effective Thread Length (Max)
199 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
275 mm
Effective Thread Length (Min)
178 mm
Effective Thread Length (Max)
249 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.2 mm
3 mm
Capacity
Build-up
Effective thread length
Performance
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Fastener Shear Performance VR,K
|
Substrate
Composite panel
|
1.2 mm |
| Steel | |
| 100 mm | 0.98 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Composite panel | 3 mm |
| 100 mm | 3.28 kN |
Installation
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | Fixfast Matchfast MF1165 |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
Downloads
Please see the below files available to download for this product
