DrillFast® carbon steel painted 4.8mm diameter thin steel fastener
Carbon steel lacquered low profile fastener for fixing to thin steel.
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Product Code
DFX-P-L-4.8 x 13
Lead Time
2-3 Days
Your price
Qty
£0.10
(ex.VAT)
(ex.VAT)
This item may be subject to a £30 powder coating surcharge. This will be confirmed at checkout
Create New Favourites List
Key Features
Specification
Capacity
Performance
Installation
Downloads
Description
Carbon steel low profile fasteners for fixing to thin steel sheeting.
Features & Benefits
- Unique design for excellent performance
- High pull-out values obtained in thin steel sheet
- Serrated head style for improved back-out resistance
- Available lacquered in almost any RAL or BS colour.
Application
- Fasteners for fixing lightweight substrates to thin steel
Fastener Material
Fastener
Carbon steel case hardened with ml_organic coating
Sealing Washer
No washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Carbon steel case hardened | 25 | 20 | 12 | 0 | 0 | 0 | 0 |
Dimensions
Diameter
4.8 mm
Length (mm)
13 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
2 mm
Head Style
Low profile pan, No 2 Phillips recess
Build-up
Effective thread length
Fastener Shear Performance VR,K
|
Substrate
Steel
|
0.7 mm |
| Steel | |
| 0.5 mm | 1.91 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 0.7mm Steel: 1.06 kN |
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | 2PP |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
Please see the below files available to download for this product
Key Features
Description
Carbon steel low profile fasteners for fixing to thin steel sheeting.
Features & Benefits
- Unique design for excellent performance
- High pull-out values obtained in thin steel sheet
- Serrated head style for improved back-out resistance
- Available lacquered in almost any RAL or BS colour.
Application
- Fasteners for fixing lightweight substrates to thin steel
Specification
Fastener Material
Fastener
Carbon steel case hardened with ml_organic coating
Sealing Washer
No washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Carbon steel case hardened | 25 | 20 | 12 | 0 | 0 | 0 | 0 |
Dimensions
Diameter
4.8 mm
Length (mm)
13 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
2 mm
Head Style
Low profile pan, No 2 Phillips recess
Capacity
Build-up
Effective thread length
Performance
Fastener Shear Performance VR,K
|
Substrate
Steel
|
0.7 mm |
| Steel | |
| 0.5 mm | 1.91 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 0.7mm Steel: 1.06 kN |
Installation
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | 2PP |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
Downloads
Please see the below files available to download for this product
