DrillFast® painted low profile timber fastener, no washer

A2/304 stainless steel lacquered low profile facade screw for fixing to timber. No sealing washer - for when a weatherseal is not required, often in secret fix or internal applications.

DrillFast® painted low profile timber fastener, no washer

A2/304 stainless steel lacquered low profile facade screw for fixing to timber. No sealing washer - for when a weatherseal is not required, often in secret fix or internal applications.

Product Code

Lengths*

Size guide

Colour*

Your price

Per 100

Qty

This item may be subject to a £30 powder coating surcharge. This will be confirmed at checkout

Create New Favourites List

Related Products

Add to favourites

Create New Favourites List

DrillFast® 5.5mm painted low profile timber fastener, no washer

Colour

Lengths

Product code

Your price

Per 100

DrillFast® 5.5mm painted low profile timber fastener, no washer

Your price £39.98 (ex.VAT)

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Austenitic Stainless Steel A2 Grade (304)	30	25	25	25	15	0	0

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Austenitic Stainless Steel A2 Grade (304)	30	25	25	25	15	0	0

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Austenitic Stainless Steel A2 Grade (304)	30	25	25	25	15	0	0

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Austenitic Stainless Steel A2 Grade (304)	30	25	25	25	15	0	0

Installation tool	Variable speed electric screw gun
Installation drive	TX20
Installation speed	1500 RPM
Correct installation	Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating.
Handling	Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners.