DrillFast® Lacquered 28mm stainless stitching fastener, 19mm washer
A4/316 grade stainless steel stitching fasteners supplied pre-assembled with an aluminium backed EPDM 19mm diameter sealing washer. For use in multiple systems roofing and cladding systems such as Rooflights and Rainscreen Facade sub-framing systems
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Product Code
DF3-SSA4-LS2-6.5-L-AC19-6.3 x 28
Lead Time
2-3 Days
Your price
Per 100
Qty
£0.42
(ex.VAT)
(ex.VAT)
This item may be subject to a £30 powder coating surcharge. This will be confirmed at checkout
Create New Favourites List
Key Features
Specification
Capacity
Performance
Installation
Downloads
Description
A4/316 Stainless steel stitching fastener for clamping together multiple layers of materials.
Features & Benefits
- High pull-out performance
- A4/316 grade stainless steel fastener (EN1.4401)
- Free spin zone prevents fasteners from being over driven
- Supplied pre-assembled with a conical aluminium backed thick soft EPDM 19mm diameter sealing washer
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
AC19 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Dimensions
Diameter
6.3 mm
Length (mm)
28 mm
Head Style
Hexagon 8mm
Drilling Capacity
Steel
0.5 mm
3 mm
Build-up
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 0.7mm Steel: 1.58 kN |
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | Fixfast GreenDrive (8mm hex integral socket with retaining clip) |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Key Features
Description
A4/316 Stainless steel stitching fastener for clamping together multiple layers of materials.
Features & Benefits
- High pull-out performance
- A4/316 grade stainless steel fastener (EN1.4401)
- Free spin zone prevents fasteners from being over driven
- Supplied pre-assembled with a conical aluminium backed thick soft EPDM 19mm diameter sealing washer
Specification
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
AC19 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Dimensions
Diameter
6.3 mm
Length (mm)
28 mm
Head Style
Hexagon 8mm
Drilling Capacity
Steel
0.5 mm
3 mm
Capacity
Build-up
Performance
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 0.7mm Steel: 1.58 kN |
Installation
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | Fixfast GreenDrive (8mm hex integral socket with retaining clip) |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
