DrillFast® painted low profile heavy section panel fastener, 29mm washer

A4/316 grade stainless steel lacquered composite panel fastener for heavy section steel.

Supplied pre-assembled with a lacquered 29mm sealing washer, often used around roof lights.

Certified by

Certified by

DrillFast® painted low profile heavy section panel fastener, 29mm washer

A4/316 grade stainless steel lacquered composite panel fastener for heavy section steel.

Supplied pre-assembled with a lacquered 29mm sealing washer, often used around roof lights.

Product Code

Lengths*

Size guide

Colour*

Your price

Per 100

Qty

This item may be subject to a £30 powder coating surcharge. This will be confirmed at checkout

Create New Favourites List

Related Products

Add to favourites

Create New Favourites List

Colour

Lengths

Product code

Your price

Per 100

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Austenitic Stainless Steel A4 Grade (316)	40	40	40	40	30	25	0

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Austenitic Stainless Steel A4 Grade (316)	40	40	40	40	30	25	0

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Austenitic Stainless Steel A4 Grade (316)	40	40	40	40	30	25	0

Fastener SKU	Min	Max
DF12-SSA4-PL-HT-L29-5.5 x 165	57 mm	123 mm
DF12-SSA4-PL-HT-L29-5.5 x 230	122 mm	187 mm

Fastener SKU	Washer	Min	Max
DF12-SSA4-PL-HT-L29-5.5 x 165	A29 Washer	58 mm	131 mm
DF12-SSA4-PL-HT-L29-5.5 x 230	A29 Washer	124 mm	195 mm

Installation tool	Variable speed electric screw gun
Installation drive	Fixfast RedDrive
Installation speed	1500 RPM
Correct installation	Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating.
Handling	Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners.