DrillFast® 25mm stainless painted clip fix fastener
A2 stainless steel lacquered clip fix fasteners for fixing to light section steel.
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Product Code
DF3-SS-CF-L-4.8 x 25
Lead Time
2-3 Days
Your price
Qty
£0.27
(ex.VAT)
(ex.VAT)
This item may be subject to a £30 powder coating surcharge. This will be confirmed at checkout
Create New Favourites List
Key Features
Specification
Capacity
Performance
Installation
Downloads
Description
Lacquered low-profile fastener.
Features & Benefits
- Low profile 'clip-fix' style head
- A2 grade stainless steel
Application
- For mechanically fixing components of steel, aluminium and metal framing systems
- For mechanically fixing metal sheeting systems to light metal purlins and rails
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
No washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
4.8 mm
Length (mm)
25 mm
Effective Thread Length (Min)
1.2 mm
Effective Thread Length (Max)
8 mm
Head Style
Low profile pan, No 2 Phillips recess
Drilling Capacity
Steel
1.2 mm
3 mm
Effective thread length
Fastener Shear Performance VR,K
|
Substrate
Steel
|
1.2 mm |
| Steel | |
| 0.5 mm | 1.87 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.12 kN |
| 2mm Steel: 2.19 kN | |
| 3mm Steel: 4.1 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
No washer |
| Steel | 3 mm |
| 0.5 mm | 2.85 kN |
| 0.7 mm | 4.21 kN |
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | 2PP |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
Please see the below files available to download for this product
Key Features
Description
Lacquered low-profile fastener.
Features & Benefits
- Low profile 'clip-fix' style head
- A2 grade stainless steel
Application
- For mechanically fixing components of steel, aluminium and metal framing systems
- For mechanically fixing metal sheeting systems to light metal purlins and rails
Specification
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
No washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
4.8 mm
Length (mm)
25 mm
Effective Thread Length (Min)
1.2 mm
Effective Thread Length (Max)
8 mm
Head Style
Low profile pan, No 2 Phillips recess
Drilling Capacity
Steel
1.2 mm
3 mm
Capacity
Effective thread length
Performance
Fastener Shear Performance VR,K
|
Substrate
Steel
|
1.2 mm |
| Steel | |
| 0.5 mm | 1.87 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.12 kN |
| 2mm Steel: 2.19 kN | |
| 3mm Steel: 4.1 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
No washer |
| Steel | 3 mm |
| 0.5 mm | 2.85 kN |
| 0.7 mm | 4.21 kN |
Installation
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | 2PP |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
Downloads
Please see the below files available to download for this product
